Installation Sheet

RDM-2SWMDual Switch Module 20A

The RDM-2SWM Dual Switch Module is a 20 A general-purpose relay module built for the economical switching of incandescent lamps, switched low-voltage transformers, switched fans, and small motors. It uses positive air gap relays. The RDM-2SWM is designed for use with the RDA series of enclosures, in an AMX Lighting™ modular digital dimming system. This module's 120, 240, and 277 VAC ratings are CE, UL, and C-UL approved.

Specifications

• Dimensions (HW): 10.00" x 2.75" (25.40 cm x 6.99 cm)

Non-phase dependant

• Use wires rated at 75°C (167°F)

• Torque terminals to 7 in-lbs. (0.8 N/M)

• Max. wire size: 10 AWG (4 mm²)

• Wire stripping length: 0.28" (7 mm)

Mounting points

Line in (hot)

Load out

High-voltage connections

• Weight: 0.75 lbs. (0.34 kg)

BTU/hr: 5 each, 10 total

Control current: 85 mA per relay (170 mA total) @ 12 VDC

Caution: Pre-Installation Notes

• All Class 1 wiring must be connected to proper terminals.

• All control wiring must be connected to proper terminals.

• Disconnect power while installing or connecting the unit.

• Keep top and bottom air vents clear at all times.

• Test loads for shorts before connecting.

• Use low-voltage wires with a 300 volt rating or greater.

• Use field installed copper conductors.

Relay A

Relay B

Low-voltage control wiring: 4-pin connection to AMX Lighting master controller

• All electrical ratings are for continuous duty.

For indoor use only.

This module may require extra power from the AXlink connection or an

 

external power supply connected to the control card.

Connecting the RDM-2SWM to the AMX Lighting Master

Pin 4 (GND)

Pin 3 (RLY)

Pin 2 (DIM)

Pin 1 (+12 V)

RDM-2SWM 4-pin module connector

3(-)

1 (+)

4-pin plug from RDM series module

NOTE: The 4-pin plugs from the module connector to

the 4-pin connector on the master (black plug cover facing up).

FIG. 1 RDM-2SWM Dual Switch Module

FIG. 2 RDM-2SWM connections

RDM-2SWM UL and C-UL Ratings (per circuit)

General purpose: 2400 W

Resistive: 2400 W

Ballast: 2400 W

Motor: 277 VAC, 1 hp

Suggested Switched Loads

Incandescent

Low-voltage

Motors

Switched outlets

Fluorescent

Page 1
Image 1
AMX specifications Installation Sheet, RDM-2SWMDual Switch Module 20A

RDM-2SWM specifications

The AMX RDM-2SWM (System de Desenvolvimento Modular - 2nd Generation) is a modern multi-role armored vehicle developed primarily for Brazil's armed forces. Combining cutting-edge technologies with versatile design, the RDM-2SWM is tailored to meet contemporary battlefield demands.

One of the standout features of the AMX RDM-2SWM is its modular design. This allows for a wide range of configurations that can be adapted for various mission profiles, including troop transport, reconnaissance, medical evacuation, and command and control operations. The modularity not only enhances the vehicle's operational flexibility but also facilitates easier upgrades as technology evolves.

The RDM-2SWM is powered by a robust diesel engine that delivers impressive horsepower, allowing it to traverse diverse terrains and challenging environments. This mobility is crucial for modern military operations where speed and adaptability can be decisive factors. The vehicle can achieve rapid acceleration and maintain high speeds over different surfaces, thanks to its advanced suspension system.

In terms of protection, the AMX RDM-2SWM is equipped with composite armor that provides a well-balanced defense against small arms fire and shrapnel. Optional add-on armor kits can be integrated to enhance survivability against more substantial threats, such as anti-tank missiles and improvised explosives. Additionally, the vehicle features an array of electronic countermeasures to defend against guided munitions.

The onboard technology in the RDM-2SWM includes state-of-the-art communication systems that facilitate real-time data sharing and coordination with other units, which is essential for joint operations. An advanced situational awareness suite provides the crew with critical information about the battlefield, enhancing decision-making and combat effectiveness.

The vehicle's weapon systems are versatile and customizable. It can be fitted with a range of armaments, including machine guns, automatic grenade launchers, and anti-tank guided missiles, making it suitable for various combat scenarios. This adaptability ensures that the RDM-2SWM can support both direct engagement missions and indirect fire support.

Overall, the AMX RDM-2SWM represents a significant advancement in military vehicle design. Its combination of modularity, mobility, protection, and firepower makes it an asset for forces looking to enhance their operational capabilities on the modern battlefield. As countries continue to evolve their military strategies, vehicles like the RDM-2SWM will play a crucial role in maintaining strategic advantages.