Quick Start Guide
UDM-0102 Endeleo Multi-Format Distribution Mini-Hub
Overview
The
ETHERNET port
| Serial port | Status LED | |
Power LED |
| Source |
|
|
| Select |
|
Active input (A/B) LED | button |
| |
|
|
Preset buttons (1/2)
|
|
|
|
|
|
|
|
| |||
|
|
| SPDIF female |
| to an |
| |||||
RCA Audio |
|
|
|
|
| RCA Audio |
| ||||
| Digital Audio |
|
|
| |||||||
Left and Right (A) |
| connector (A) |
|
| Left and Right (B) | IRTX ports | |||||
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SPDIF female |
|
Digital Audio | IRRX port |
connector (B) | |
HD15 female connector (A) |
|
HD15 female connector (B) |
|
| Power connector |
FIG. 1
Compatibility
The
Product Specifications
Power Requirements: | 24VDC @ .75A |
|
|
Front Panel Components | |
| |
Ethernet | |
|
|
Serial | Enables an administrator to control the various functions |
(labelled “10101”): | to the |
| terminal connection. Requires a |
| cable |
|
|
LEDs: | The front LEDs are grouped by control type and are |
| labeled according to their corresponding port (connector) |
| numbers on the rear of the unit. |
•Power - device is receiving power
•A - Source A is currently selected
•B - Source B is currently selected
•Status - changes from red to green when it receives a valid UDP command, and returns to red after 30 seconds if it has not received anything.
SELECT (A/B) | Pushbutton switches between Source A / Source B. |
Pushbutton: |
|
|
|
PRESETS (1/2) | Two pushbuttons execute |
Pushbuttons: |
|
|
|
UDM | Provides audio/video transport as well as control via Cat5, |
| Cat5e or Cat6 to a |
|
|
Rear Panel Connectors: |
|
|
|
Source Inputs (A, B): | Two sets of input connectors for A/V source devices |
| (labelled A and B): |
•VIDEO IN:
•Analog Audio: Left (white) and Right (red) stereo RCA input connectors (female).
•Digital Audio: SPDIF (female) input connector.
IRTX Ports: | Two 3.5mm stereo IR Transmitter output ports allow up to |
| two |
| to be controlled via optional wired IR emitters. |
|
|
IRRX Port: | 3.5mm stereo input port, allows connecting an IR receiver |
| to allow learning IR commands. |
Power Socket: | 2.1mm |
|
|
Operating Environment: | • 35°F - 95°F (5°C - 35°C) |
| • Max. relative humidity - 85% |
|
|
Dimensions (HWD): | 1.61" x 8.63" x 3.66" (40.89 mm x 219.08 mm x 93.04 mm) |
|
|
Weight: | 1.60 lb. (730 g) |
|
|
Certifications: | • CE |
| • FCC part 15 Class A |
|
|
Included Accessories: | Power Supply, 24VDC, 750 mA with cable |
|
|
Other AMX Equipment: | • HD15 to |
| • HD15 to 3x RCA Breakout Cable |
| • RS232 DB9/RJ12 Connection Cable |
| • |
| • |
| Control |
| • IR01 IR Emitter Module |
| • IR03 External IR Receiver Module |
|
|
Audio & Video Formats/Resolutions/Distance
Audio & Video Formats/Resolutions/DistanceClass | Format | Name | Distance (m) | Distance (ft.) |
Composite | 720x480 | NTSC | 700 | 2300 |
| 720x756 | PAL | 700 | 2300 |
Component | 720x480 | 480p | 700 | 2300 |
| 720x756 | 576p | 700 | 2300 |
| 1280x720 | 720p | 200 | 650 |
| 1920x1080 | 1080i | 150 | 500 |
| 1920x1080 | 1080p | 120 | 400 |
VGA | 640x480 | VGA | 200 | 650 |
| 800x600 | SVGA | 200 | 650 |
| 1024x768 | XGA | 200 | 650 |
| 1280x1024 | SXGA | 150 | 500 |
| 1600x1200 | UXGA | 120 | 400 |
A/V Source Input Connectors
There are 2 sets of input connectors to the rear panel of the
Connecting a VGA Video Input
1.Connect one end of a VGA cable to the source device’s VGA output port.
2.Attach the other end of the cable to the appropriate VIDEO IN connection
(A or B) on the UDM. For example, connect to the Video In connection on Input A of the Hub.
3.Connect any audio to the analog (RCA) audio connectors or digital (SPDIF) connector.
Note: Ensure Input A is configured as a “VGA Input” and named appropriately within the “Inputs” section of the Configuration software. Also ensure the correct Audio Type (Analog L/R or S/PDIF) is selected for the relevant input.
Connecting a Composite Video Input
1.Connect the
•A1 = red RCA •A2 = green RCA •A3 = blue RCA
2.Attach the other end of the cable to the appropriate VIDEO IN connection (A or B) on the UDM.
3.Connect any audio to the analog (RCA) audio connectors or digital (SPDIF) connector.
Connecting a Component Video Input
1.Connect the
2.Attach the other end of the cable to the appropriate VIDEO IN connection (A or B) on the UDM.
3.Connect any audio to the analog (RCA) audio connectors or digital (SPDIF) connector.