Bluetooth EZ-Extender Manual 2-1
2 BLUETOOTH EZ-EXTENDER HARDWARE REFERENCE
This chapter describes the hardware design of the Bluetooth EZ-Extender.
The following topics are covered.
•“System Architecture” on page 2-2
Describes the daughter board’s configuration and explains how the
board components interface with the processor and EZ-Board.
•“Configuration Switch” on page 2-3
Shows the location and describes the board’s configuration switch.
•“Jumpers” on page 2-5
Shows the location and describes the board’s jumpers.
•“Power LED” on page 2-7
Shows the location and describes the board’s power LED.
•“Connectors” on page 2-8
Shows the locations, describes, and provides part numbers for the
on-board connectors. In addition, the manufacturer and part num-
ber information is provided for the mating parts.