Analog Devices 82-000218-01 manual Configuration Switch, Bluetooth EZ-Extender Hardware Reference

Bluetooth EZ-Extender Hardware Reference

The board contains a Bluegiga WT12 class 2, a Bluetooth 2.0, and EDR module, described in “Bluetooth Module” on page 1-5. The EZ-Extender is equipped with an I2C serial flash memory chip for data storage and configuration.

Configuration Switch

This section describes the board’s configuration switch (SW1). The switch location is shown in Figure 2-2.

Figure 2-2. Configuration Switch Location

Bluetooth EZ-Extender Manual 2-3