Anchor Audio AN-130 Getting Started, Using Your Wireless Microphones, Warranty Registration

A MESSAGE FROM THE OWNER

OPERATING THE WIRELESS MICROPHONE / TRANSMITTER

Thank you for choosing an Anchor Audio portable sound system. Our products incorporate state-of-the-art design and the finest quality of materials and workmanship. We’re proud of our products and appreciate the confidence which you have shown by selecting an Anchor system.

I hope you’ll take a few minutes to review this manual. We’ve incorporated several unique features into our products, and your knowledge of how to use them will enhance the performance and your enjoyment of the system.

David Jacobs, President

on behalf of all Anchor Employees

GETTING STARTED

CHANNEL SELECTION - HANDHELD TRANSMITTER

1.Unscrew battery cover on bottom of microphone

2.Set the CHANNEL SELECTOR dial to match the channel setting of your receiver

3.Replace the battery cover

CHANNEL SELECTION - BODY-PACK TRANSMITTER

1.The channel selection dial is located on the side of the transmitter

2.Set the CHANNEL selection dial to match the channel setting of the receiver

Please check your new unit carefully for any damage which may have occurred during shipment. Each Anchor product is carefully inspected at the factory and packed in specially designed boxes for safe transport.

Notify the freight carrier immediately of any damage to the shipping box or product. Repack the unit in the original box and wait for inspection by the carrier’s claim agent. Notify your dealer of the pending freight claim.

NOTE: When using dual wireless, each microphone must be set to a different channel!

USING YOUR WIRELESS MICROPHONES

After you have set the transmitter channel (see above) you are ready to use your wireless microphone:

NOTE: All damage claims must be made with freight carrier!

RETURNING SYSTEMS FOR SERVICE OR REPAIR

For service or repair, please contact the dealer you purchased your system from or Anchor Audio Customer Service at

(888)444-6077 to obtain a RA (Return Authorization) number. All shipments to Anchor Audio must include an RA number and must be shipped prepaid. C.O.D. shipments will be refused and returned at your expense.

1.Body-pack transmitter users must insert the mic plug into the transmitter jack marked MIC

2.Turn the transmitter power switch to ON

(The red LED will flash when the mic is turned on. If the red LED stays on, the battery is low)

3.Turn the AN-130 power switch to ON

4.The RX indicators will light (one indicator at a time lights) when the wireless signal is being transmitted and received

IMPORTANT: Save the shipping box & packing materials,

they were specially designed to ship your unit!

WARRANTY REGISTRATION

Please go to our website (www.anchoraudio.com) and select “Warranty Registration”. Completing this online registra- tion form will activate your limited six-year warranty.

CAUTION: Harmful feedback may occur when walking in front of a sound system or speaker with a wireless microphone. Always point microphone away from speakers!

REPLACE BATTERY - HANDHELD TRANSMITTER		REPLACE BATTERY - BODY-PACK TRANSMITTER
1.	Unscrew battery cover on bottom of microphone	1.	Slide open battery cover on front of transmitter
2.	Replace old batteries with 2 fresh ‘AA’ alkaline	2.	Replace old batteries with 2 fresh ‘AA’ alkaline
	batteries		batteries
3.	Replace and tighten the battery cover	3.	Replace and tighten the battery cover

	NOTE: Transmitter power must be OFF when changing batteries!
2		7