BASIC SYSTEM OPERATION

The AN-130 monitor is used to amplify the signal from a microphone, electronic musical instrument or line-level sources (cassette, CD, VCR, etc).

You’ll need a connection cable and an AC outlet.

1.Place the AN-130 in desired location

2.Set volume control on front of speaker to minimum

3.Plug the power cord into a grounded 115 volt outlet (220 volt outlet for export model)

4.Plug a microphone into the MIC input jack, or an audio source into a LINE IN jack

5.Turn the power switch on the rear panel “ON” (red LED on front panel should light)

6.Adjust the volume, bass & treble controls to desired levels

IMPORTANT: To avoid feedback, do not position

a microphone in front of speaker.

PROBLEMS? Consult the troubleshooting section

on the back page of this manual.

LINE IN

The line-level RCA input jacks may be used with audio sources such as computers, VCR’s, and

cassette tape or compact disc players. The inputs may be used for two separate sources, orPOWER SWITCH they may be used to sum L+R stereo outputs to a mono signal without the need for adapters.

AN-130

CONTROL PANEL

Model Shown: AN-130U1

CAUTION: ALWAYS use shielded audio cables on

input connections to prevent interference.

NOTE: For UHF Wireless microphones

& transmitters see page 6.

MIC IN

An unbalanced, low impedance microphone input is for use with the MIC-90P or other mics that have a 1/4” phone plug.

LINE OUT

The unbalanced Line-out provides a combined signal of all inputs being used. You can use this function to record your presentation or to “daisy chain” another powered sound system to the AN-130 for greater crowd coverage.

Note: This output is post source level; any volume fluctuations for a specific input will affect the output signal level at this output.

POWER CORD

NOTE: SEE PAGE 6

FOR WIRELESS RECEIVER

INSTRUCTIONS

 

AN-130 ACCESSORIES

REMOTE-130 - Wireless Remote Control

MSB-201 - Combo Mic/Speaker Stand

HC-1610B - Hard Case

Controls volume level and mute for the AN-130RC.

Floor stand w/ 33” adjustable boom. Speaker stand

Projector Protector hard case - holds projector,

MIC-90P - Handheld Microphone

when combined w/ SB-1 mounting bracket.

AN-130 and mic.

 

 

Anchor’s dynamic, balanced, low impedance micro-

HS-1 - Carry Handle

CC-100 - Carry Bag

phone with a unidirectional pick-up pattern. It has a

Convenient attachable handle for AN-130.

Cordura nylon bag w/ storage compartment.

on/off switch and comes with a 20’ cable and mic clip.

HC-1550 - Hard Case

SB-1 - Swivel Stand Mounting Bracket

 

SS-250 - Speaker Stand

Traveling hard case, holds up to two AN-130’s,

Mounts the AN-130 to a wall, ceiling or on a speaker

Adjustable stand made of black, anodized aluminum.

two mics & accessories.

stand. Spekaer stand adapter included.

SB-3 - Swivel Wall Mounting Bracket

 

Mounts the AN-130 to the wall or ceiling.

 

SB-360 - Swivel (360o) Wall Mounting Bracket

 

Mounts the AN-130 to the wall or ceiling.

 

RM-1 / RM-12 - Single / Dual Rackmount Kits

 

Mounts AN-130 monitors in a standard equipment

 

rack, three spaces high or 5-1/4”. All kits include

5

mounting hardware and are adjustable front & back.

 

Page 3 Page 4
Page 4
Image 4
Anchor Audio owner manual Basic System Operation, AN-130 Accessories
Page 3 Page 4

AN-130 specifications

Anchor Audio has long been a trusted name in the field of portable sound reinforcement, and the AN-130 is a testament to the brand's commitment to quality and innovation. This compact yet powerful speaker system is designed to cater to a variety of applications, making it an ideal choice for educators, presenters, and event organizers alike.

One of the standout features of the Anchor Audio AN-130 is its exceptional sound clarity and coverage. Equipped with a robust 30-watt amplifier, this system delivers impressive audio performance that can fill medium-sized venues with ease. Its frequency range is optimized to ensure that voices are clear and intelligible, making it suitable for classrooms, auditoriums, and outdoor events. The AN-130 also incorporates a high-efficiency speaker driver that enhances sound dispersion, allowing audiences to hear every word, no matter where they are located in the room.

Portability is another key characteristic of the AN-130. Weighing just 9 pounds, this speaker system is lightweight and easy to transport. The built-in retractable handle and wheels allow for hassle-free mobility, making it perfect for users who need to move from one location to another quickly. The rugged construction is designed to withstand the rigors of frequent use, ensuring longevity and reliability.

The AN-130 is equipped with versatile connectivity options, including an integrated microphone input and a line input for connecting additional audio sources. This feature allows users to plug in various devices, such as smartphones, tablets, or musical instruments, extending the system’s functionality. Furthermore, the speaker has a built-in rechargeable battery that offers up to 12 hours of continuous use, ensuring that it can operate throughout a full day of presentations or performances without needing a power outlet.

The user-friendly controls on the AN-130 make it easy for anyone to operate, regardless of their technical expertise. The intuitive interface allows users to adjust volume levels, audio sources, and other settings effortlessly. Additionally, the system comes with an optional handheld wireless microphone, enhancing the convenience of use in various settings.

In summary, the Anchor Audio AN-130 is an exceptional portable speaker system that combines high-quality sound, user-friendly features, and portability. With its powerful performance, versatile connectivity, and long battery life, it is an excellent choice for anyone in need of reliable sound reinforcement in diverse environments. Whether for educational settings, corporate events, or outdoor gatherings, the AN-130 is poised to meet the demands of any presentation or performance with ease.
Top Page Image Contents