ERECTING 2nd BEAM 1st
ATTACH PUSH POLE EXTENSION TO
TOP OF THE LONG LIFTING POLE.
HOOK INTO PEAK WELDMENT BRACKET
&TWIST TO SECURE. THIS WORKER CONTROLS PEAK DURING ERECTION.
WORKERS LIFT FIRST AT THE
PEAK, THEN SHUFFLE SIDEWAYS
TOWARD THE UPRIGHTS.
AS THE 2ND BEAM PIVOTS
TOWARD VERTICAL, THE
TRAILING SAFETY WEBS
DRAW TIGHTER.
SECURING THE 1st BEAM SAFELY
ON THE LEADING
INSERT LOOSE ENDS OF UPPER SAFETY WEBS INTO
THE RATCHETS OF THE LOWER SAFETY WEBS.
USING RATCHETS, ADJUST LEADING AND
TRAILING SAFETY WEBS AGAINST EACH
OTHER ON BOTH SIDES OF THE STRUCTURE
TO SECURE AND VERTICALLY ALIGN THE
BEAM
ERECTING THE 2nd BEAM
WITH 2nd BEAM SECURED BY SAFETY WEBS, THE 1st BEAM IS ROTATED TOWARD IT. (2) OR (3) WORKERS SHOULD HOLD THE BEAM AT VERTICAL UNTIL EAVE BARS (ER20) ARE INSTALLED (SEE NEXT STEP).
10
