INSTALLING MID PANEL
PULL MID PANEL UP AND OVER THROUGH
CHANNELS IN RAFTER EXTRUSIONS.
INSERT FINGERS OF WHEELED PANEL GUIDE |
|
INTO THE OPEN END OF THE RAFTER AND |
|
WELDMENT. TIGHTEN THE BUTTERFLY NUT. |
|
REVERSE FOR OPPOSITE SIDE OF BAY. | RAFTER |
| WHEELED PANEL |
| GUIDE |
INSTALLING
WHEELED PANEL
GUIDE AT EAVE
SECURE LACE LINE AT TOP & BOTTOM WITH FASTEX BUCKLES
STANDARD LOOP & GROMMET LACING
USE LONG LIFTING POLE TO PUSH EACH HALF TO PEAK.
TIE OFF BOTTOM LOOP
FABRIC TENSIONING
TOP
CATENARY
TAILSTENSIONING
WEB (RIGHT)
W/ RING
TENSIONING |
|
|
|
WEB (LEFT) |
|
|
|
W/ RING |
| TENSIONING RINGS |
|
|
|
| |
|
| OVERLAPPED |
|
| UPRIGHT |
| ATTACH WEB/RATCHET |
|
| TO TRIANGLE RING AND | |
|
|
| |
|
| WEB/RATCHET | TENSION DOWNWARD. |
|
|
|
TENSIONING METHOD:
1.PASS RING OF LEFT TENSIONING WEB THROUGH OPPOSITE CATENARY RING.
2.PASS RING OF RIGHT TENSIONING WEB THROUGH ITS OWN CATENARY RING (PASSING OVER THE LEFT WEB).
3.CONTINUE RING OF RIGHT TENSIONING WEB THROUGH OPPOSITE CATENARY RING.
4.OVERLAP BOTH TENSION RINGS. ATTACH WEB/RATHCET AND TENSION DOWNARD AGAINST TENSION HOLE IN UPRIGHT. (CATENARY RINGS SHOULD MOVE CLOSER TOGETHER AS RATHCET IS TIGHTENED.)
1.USE WEB/ RATCHETS TO SECURE CATENARY ARCHES TO UPRIGHTS, STAKE BASEPLATES BEFORE TENSIONING WEBS.
13
