♦If the supply cord is damaged, it must be replaced by manufacturer or its service agent or similarly qualified personnel in order to avoid a hazard.

♦The output nozzle becomes very hot during operation (200°C). Keep flammable materials at least 50 cm away from the nozzle.

♦Always allow your ANTARI Fog Machine to cool down before attempting to clean or service it.

Danger of Explosion

♦Never add flammable liquids of any kind (such as oil, gas, perfume) to the fog liquid.

♦Use only high-quality, water-based fog liquid that your dealer recommends. Other fog liquids may cause clogging or “spitting”.

♦Always make sure there is sufficient liquid in the tank. Operating this unit without liquid will cause damage to the pump as well as over-heating of the heater.

♦If your ANTARI Z-1200II, Z-1500II or Z-3000II Fog Machine fails to work properly, discontinue use immediately. Drain all fog liquid from the tank, pack the unit securely (preferably in the original packing material), and return it to your ANTARI dealer for service.

♦Always drain tank before mailing or transporting this unit.

♦Never drink fog liquid. If it is ingested, call a doctor immediately. If fog liquid comes in contact with skin or eyes, rinse thoroughly with water.

Note: Pay attention to all warning labels and instructions printed on the exterior of your ANTARI Fog Machine

Unpacking & Inspection

Open the shipping carton and verify that all equipment necessary to operate the system has arrived intact. The shipping carton should contain the following items:

1.One unit of Z-Series II Fog Machine with power cord

2.Mounting brackets with washers/screws (for Z-1200II)

3.Z-8 Multi-function remote control with attached cord (for Z-1200II)

4.Z-20 multi-function remote control with attached cord (for Z-1500II & Z-3000II)

5.User Manual

If any equipment is missing contact your ANTARI dealer immediately.

Before beginning your initial setup on ANTARI Z-1200II, Z-1500II or Z-3000II Fog Machine, make sure that there is no evident damage caused by transportation. In the event that the unit’s housing or cable is damaged, do not plug it in and do not attempt to use it until after contacting your ANTARI dealer for assistance.

Setup

♦Remove all packing materials from shipping box. Check that all foam and plastic padding is removed, especially in the nozzle area.

♦Place fog machine on a flat surface and remove fog liquid tank cap.

♦Fill with high-quality, water-based fog liquid recommended by ANTARI dealer. Any other types of fluid can damage the unit resulting in spitting and serious clogging problem. When filled, place cap back on liquid tank.

Be careful not to exceed the maximum fluid level. DO NOT OVERFILL.

♦Firmly attach the Z-8 or Z-20 control module cable to the connector inside the rear chamber of the machine.

3

Page 2 Page 4
Page 3
Image 3
Antari Lighting and Effects Z-3000II user manual Unpacking & Inspection, Setup
Page 2 Page 4

Z-3000II specifications

The Antari Lighting and Effects Z-3000II is a professional-grade fog machine designed for various applications, including concerts, theatrical performances, events, and other entertainment setups. Known for its reliability and versatility, the Z-3000II is a popular choice among lighting designers and event professionals.

One of the standout features of the Z-3000II is its high output capability. This fog machine can produce a substantial amount of fog, making it suitable for large venues and outdoor events. Its powerful pump allows for quick fog production, ensuring that spaces are filled with dense fog within moments. The adjustable output allows users to control the density and volume of the fog, catering to the specific needs of different performances or events.

The Z-3000II employs advanced heating technology, which ensures that the fog fluid is vaporized efficiently and consistently. This results in a thick, lingering fog that enhances the visual effects of lighting setups. The machine heats up quickly, typically within a few minutes, allowing for immediate use during critical moments of events.

In terms of user convenience, the Z-3000II is equipped with a remote control system that allows for easy operation from a distance. This feature is particularly useful in live performance settings, where operators need to manage fog output without interrupting the flow of the event. Additionally, the machine has a built-in timer, which provides further flexibility in controlling fog release times.

The construction of the Z-3000II is robust and designed for durability, making it suitable for frequent use in demanding environments. Its compact form allows for easy transportation and setup, a significant advantage for mobile entertainers and rental companies.

Furthermore, the Z-3000II is compatible with various fog fluids, allowing users to choose the type of fog effect they want to achieve. This adaptability adds to its versatility across different applications and artistic styles.

In conclusion, the Antari Lighting and Effects Z-3000II is a highly effective fog machine, offering impressive features and technologies aimed at enhancing lighting design and event production. Its high output, efficient heating, remote operation, and durable construction make it an essential tool for professionals seeking to create captivating atmospheres.
Top Page Image Contents