2.3
MOTHERBOARD INSTALLATION
1.Lay the case down, with the open side facing up. The drive cages and power supply should be visible.
2.Make sure you have the correct I/O panel for your motherboard. If the panel provided with the case isn’t suitable, please contact your motherboard manufacturer for the correct I/O panel.
3.Align your motherboard with the standoff holes and remember which holes are lined up. Not all motherboards will match with all the provided holes; this is normal and won’t affect its functionality.
4.Remove your motherboard by lifting it up.
5.Install standoffs as needed and put the motherboard back in.
6.Screw in your motherboard to the standoffs with the provided
2.4
INTERNAL 3.5” DEVICE INSTALLATION
The
1.Insert your 3.5” device into the 3.5” drive cage from the rear of the cage until the mounting holes align with the screw holes in the cage.
2.Fasten the device in place with the provided screws.
3.Mount any other 3.5” HDD devices accordingly.
4.Connect the appropriate power and data cables to the device(s).
8
