T R O U B L E S H O O T I N G
If at any time the Amp 1 fails to work properly, consult this checklist:
1.Check that the AC Detachable Power Cord is plugged into the Amp 1 Detachable Power Cord Socket (C) and is con- nected to a live source of AC power. For instance, if using a power bar, check that the bar is turned on.
2.Ensure that all Input and Output connections are secure for a proper electrical contact.
4.Be sure the rest of the system is functioning properly (i.e. source unit, power amplifiers, cables and connections, etc.).
5.With tubes, fuses, covers and power cords in place, check that the LED (A) is lighted (glowing light green). If all of the above troubleshooting steps have been followed and the LED is not lighted (remains dark green), contact your dealer or distributor for assistance.
FI G UR E 4
Alignment of the AC power connector and detachable cord.
3. DISCONNECT THE AC POWER CORD, wait 5 minutes and check that:
•A
•The AC power fuse is intact and has not blown. If the fuse has blown, the thin metal conductor will have melted and the glass may appear “smoked”. If the fuse has blown, replace with a fuse of the same rating (3.5 Amp/250V
NOTE: Under no circumstances should you replace the AC power fuse with one of a higher current rating! Doing so may cause further damage to the Amp 1 and will also void the warranty. In addition, your continued protection from risk of fire or shock would be seriously compromised.
•Ensure the tubes are plugged firmly into their sockets as described in “INSERTION OF THE TUBES”.
FI G UR E 5
Removal of the fuse holder.
WARNING-DISCONNECT THE A C
DE TA C H A B L E POWERCORDFROM T H E AMP 1 AND WAIT 5 MINUTES BEFORE REMOVING COVER, TUBES OR FUSE.
6
