ANUBIS SPEEDNET WIRELESS PCMCIA CARD instruction manual 3.2 “Statistics”

Typhoon Speednet Wireless PCMCIA Card

uTx Rate: Shows the Data Transfer Rate. There are 1 Mbps, 2M bps, 5.5 Mbps, 11 Mbps, and auto mode. If you select “auto mode”, the device will choose the most suitable rate automatically.

uPower Mgmt Mode: Shows the Power Management mode. There are two optional selections for this mode.

ØActive – Adapter will always set in active mode.

ØPower Save – Adapter will enter power saving mode when it is idle.

uSignal Strength: This bar shows the signal strength level. The higher the blue bar, the more radio signal been received by the Wireless PCMCIA Card. This indicator helps to find the most comfortable antenna/workstation position for quality network operation.

uLink Quality: The measured Signal Strength level gives the overall Link Quality and Connection Status.

uMAC Address: The MAC Address of the Wireless PCMCIA Card. Unique 48-bit, hard- coded Media Access Control address known as the station identifier.

3.2 “Statistics”

uData Field: Shows the total amounts of data packets that have been successfully/unsuccessfully transmitted or received by the adapter.

uManagement Field: Shows the total amounts of management packets been successfully/unsuccessfully transmitted or received by the adapter.

uRejected Packets Field: Shows the total amounts of rejected packets that have been transmitted or received by the adapter.

11