ANUBIS SPEEDNET WIRELESS PCMCIA CARD Configuration Utility, C h a p t e r, 3.1 “Status”

Typhoon Speednet Wireless PCMCIA Card

C h a p t e r

3

Configuration Utility

The Configuration Utility is a powerful application that helps you configure the Wireless PCMCIA Card and monitor the statistics of the communication process. Double-click the icon on the system tray to view the configuration mode.

This utility can be used to change the following configuration parameters when the device is active.

Please continue to read the following instructions.

Note: Click “Exit” to leave the configuration application.

3.1 “Status”

Click “Change” to set up the necessary parameters, and click “Submit” after the configuration has been changed.

uOperation mode: Shows the following network modes

ØInfrastructure – This operation mode requires the presence of an 802.11 Access Point. All communication is done via the Access Point.

ØAd-Hoc – Dieser Modus ist der 802.11 Peer-to-Peer-Betrieb. Die gesamte Kommunikation läuft von Client zu Client ohne Access Point.

uChannel: Shows the numbers of the radio channel used for the networking. Only Access Points and Ad-Hoc nodes create the BSSID. The parameters are not active in the infrastructure operation mode.

uSSID: Shows the SSID of the BSS that one is willing to join.

10