Cisco Systems SMNMADPTR manual NAM Configuration NAM Software

Configuring the NME-NAM-120S for Management

NAM Configuration (NAM Software)

root@myNAM.company.com# show ip

IP address:	209.165.200.226
Subnet mask:	255.255.255.224
IP Broadcast:	209.165.200.255
IP Interface:	Internal
DNS Name:	myNAM.company.com
Default Gateway:	209.165.200.225
Nameserver(s):	171.69.2.133
HTTP server:	Enabled
HTTP secure server:	Disabled
HTTP port:	80
HTTP secure port:	443
TACACS+ configured:	No
Telnet:	Enabled
SSH:	Disabled

Configuring the Internal Interface for Management—Routable Subnet

This section describes how to configure the NME-NAM-120S internal interface for management using a routable subnet method.

SUMMARY STEPS

From the Router Prompt

1.enable

2.configure terminal

3.interface integrated-service-engine slot/0 Or for NM-NAM devices:

interface analysis-module slot/0

4.ip address <router-side-address> <subnetmask>

5.no shutdown

6.service-module ip address <NAM-Address> <subnetmask>

7.service-module ip default-gateway <router-side-address>

8.end

DETAILED STEPS

	Command or Action
Step 1	enable
Step 2	configure terminal

Purpose

Enter IOS exec mode.

Enter IOS configuration from terminal mode.

Cisco Branch Routers Series Network Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0

OL-14942-02 25