Cisco Systems SMNMADPTR manual Upgrading the NAM Application Image Patch

How to Install, Upgrade, or Downgrade NME-NAM-120S

Example:

Cisco Systems, Inc.

Services engine helper utility for NME-NAM-120S

Version 1.1(0.5)

-----

Main menu

1 - Download application image and write to HDD

2 - Download application image and reformat HDD

3 - Download bootloader and write to flash

4 - Download helper and write to Compact Flash

5 - Display software versions

6 - Reset application image CLI passwords to default

7 - Change file transfer method (currently ftp/http)

8 - Show upgrade log

9 - Send Ping

f - Format the Compact Flash

r - Exit and reset Services Engine

h - Exit and shutdown Services Engine

Selection [123456789frh]:

Step 10 Reboot the NME-NAM-120S using helper menu option r.

Step 11 Close the session as described in Closing a Session, page 11.

Upgrading the NAM Application Image — Patch

This section describes how to add a patch to your NAM application image from the NAM CLI.

SUMMARY STEPS

1.Access the NME-NAM-120S console by following the steps described in Opening a Session, page 10.

Note Depending on the previous state of the session, you might be prompted to log in to the NAM CLI.

2.At the NME-NAM-120S prompt, enter one of: patch ftp://user:passwd@host/full-path/filenameor

patch ftp://user@host/full-path/filename

3.show patches

4.Close the session as described in Closing a Session, page 11.

Cisco Branch Routers Series Network Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0

16 OL-14942-02