Configuring the
Router Configuration (Cisco IOS Software)
!
interface loopback 0
ip address 10.1.1.1 255.255.255.0
!
!
interface
no shutdown
!
NAM Configuration (NAM software)
root@myNAM.company.com# show ip
IP address: | 209.165.201.2 |
Subnet mask: | 255.255.255.224 |
IP Broadcast: | 209.165.201.223 |
IP Interface: | External |
DNS Name: | myNAM.company.com |
Default Gateway: | 209.165.201.222 |
Nameserver(s): | 171.69.2.133 |
HTTP server: | Enabled |
HTTP secure server: | Disabled |
HTTP port: | 80 |
HTTP secure port: | 443 |
TACACS+ configured: | No |
Telnet: | Enabled |
SSH: | Disabled |
Disabling AAA Login Authentication on the NAM Console Line
If you configured authentication, authorization, and accounting (AAA) on your router, then you might have to log in twice to open a NAM console session from the router: first with your AAA username and password, and second with the NAM login and password.
If you do not want to log in twice to open a NAM console session from the router, then disable AAA login authentication on the router’s NAM console line by performing this procedure.
Note, however, that if your router contains both the
SUMMARY STEPS
1.enable
2.configure terminal
3.aaa authentication login
4.line number
5.login authentication list-name
6.end
7.show running-config
Cisco Branch Routers Series Network Analysis Module
32 |
| |
|
