Cisco Systems SMNMADPTR Telnet Prerequisites, SSH Prerequisites, exit 6. logout, Summary Steps

Configuring the NME-NAM-120S For Network Connectivity

–From the NAM CLI, ping the NAM system default gateway.

Telnet Prerequisites

•Enter the exsession on NAM CLI command. See Step 5 of the “Configuring the NME-NAM-120S For Network Connectivity” section on page 34.

SSH Prerequisites

•Install the NAM software K9 cryptographic patch, which you can download from Cisco.com.

•Enter the exsession on ssh NAM CLI command. See Step 5 of the “Configuring the NME-NAM-120S For Network Connectivity” section on page 34.

SUMMARY STEPS

1.telnet {ip-address hostname} or

ssh {ip-address hostname}

2.At the login prompt, enter root.

3.At the password prompt, enter your password. or

If you have not changed the password from the factory-set default, enter root as the root password.

4.Perform the tasks that you need to perform in the NAM CLI. When you want to end the Telnet or SSH session to the NAM and return to the Cisco IOS CLI, complete Step 5 and Step 6.

5.exit

6.logout

DETAILED STEPS

	Command or Action	Purpose
Step 1
	telnet {ip-address hostname}	Logs in to a host that supports Telnet.
	or	or
	ssh {ip-address hostname}	Starts an encrypted session with a remote networking
	Example:	device.
		• Use the NAM system IP address or NAM system
	Router# telnet 10.20.30.40
		hostname.
	Example:
	Router# ssh 10.20.30.40
Step 2
	At the login prompt, enter root.	Accesses the root (read/write) level of NAM.
	Example:
	login: root

Cisco Branch Routers Series Network Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0

46 OL-14942-02