Cisco Systems SMNMADPTR Network Modules, NME-NAM-120S, Router Platform, namnme.htmll, tM.html

Prerequisites for NME-NAM-120S

Table 2	NME-NAM Supported Router Platforms (continued)
			NM Adapter Card
Router Platform		IOS Version (Minimum)	Required?
Cisco 3845 ISR		Cisco IOS 12.4(9)T	No
Cisco 3825 ISR		Cisco IOS 12.4(9)T
Cisco 2851 ISR		Cisco IOS 12.4(9)T
Cisco 2821 ISR		Cisco IOS 12.4(9)T
Cisco 2811	ISR	Cisco IOS 12.4(9)T
Cisco 3745	MSR	Cisco IOS 12.4(9)T
Cisco 3725	MSR	Cisco IOS 12.4(9)T

Note The NM-NAM is not supported on ISR G2 platforms.

To determine which IOS release your router is currently running, examine the output of the show version command.

Network Modules

To install an NME-NAM-120S network module, see the following:

•Connecting Cisco NAM Enhanced Network Modules to the Network

http://www.cisco.com/en/US/docs/routers/access/interfaces/nm/hardware/installation/guide/

namnme.htmll

•Cisco Network Modules and Interface Cards Regulatory Compliance and Safety Information http://www.cisco.com/en/US/docs/routers/access/interfaces/rcsi/IOHrcsi.html

To install an NME-NAM-120S network module in supported ISR G2 platforms using the NM Adapter Card, see the following:

•Installing Cisco Network Modules and Service Modules, section “Using Network Modules in Service Module Slots on Cisco 2900 Series and Cisco 3900 Series Routers”:

http://www.cisco.com/en/US/docs/routers/access/interfaces/nm/hardware/installation/guide/InstNe

tM.html

NME-NAM-120S

•The NME-NAM-120Sships from the factory with the following:

–120 GB hard disk

–1 GB memory

–64 MB flash memory

•Make a note of the network module location in the host router:

Cisco Branch Routers Series Network Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0

OL-14942-02 3