Cisco Systems SMNMADPTR Configuring Logging Options and Generating Diagnostics, show version

Configuring the NME-NAM-120S For Network Connectivity

Table 4	Common Verification and Troubleshooting Commands (continued)
Configuration Mode		Command	Purpose
Router#		show version	Displays information about the loaded
			router, software or network module
			bootloader version, and also hardware
			and device information.
Router#		test scp ping	Pings the network module to check
			network connectivity.
Router#		verify	Displays version information for installed
			hardware and software.
SE-Module>		ping	Pings a specified IP address to check
			network connectivity (does not accept a
			hostname as destination).

Configuring Logging Options and Generating Diagnostics

To configure logging options for NME-NAM-120S, use commands as needed from the list of common network module commands shown in Table 5 and Table 6.

Note Some keyword options for many of the log and trace commands is provision to display diagnostic output on your screen or to pipe it to a file or a URL.

	Table 5	Common Syslog Commands
	Configuration Mode		Command	Purpose
	Router#		show log	Displays the contents of the specified log.
			copy log	Saves the syslog to a destination of your
				choice.
			show log	Displays the contents of the specified log.
			show logs	Displays a list of available log files.
	Table 6	Common Trace Commands
	Configuration Mode		Command	Purpose
			clear trace	Clears logged trace events for specified
				modules.
			log trace	Logs configured traces to the network
				module (can be done locally or remotely).
			no trace	Disables tracing for specified modules,
				entities, or activities.
			show errors	Displays error statistics by module,
				entity, or activity.
			show trace	Displays trace settings.
	Cisco Branch Routers Series Network Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0
OL-14942-02					51