AOC CT700G user manual Cont, switch to ON position, Figur3

OPERATING INSTRUCTIONS		Figur1 Installand Removing Swivel e
GENERAL INSTRUCTIONS
The other control knobs	are located at	the base of the monitor
(See Figure 3). By changing these settings, the picture can be
adjusted to your personal preferences.
∙ The power cord should be connected.
∙ Connect the video cable from the monitor to the video card.
∙ To turn the monitor on,	press the power	switch to ON position.
The power indicator will light up.
∙ Your monitor features a unique quick switch system which
provides a picture within seconds after the monitor is switched
on.
NOTES
∙ Do not install the monitor in a location near heat sources such
		Figur2 Connecti Cable
as radiators or air ducts, or in a place subject to direct sunlight,

or excessive dust or mechanical vibration or shock.

∙ Save the original shipping carton and packing materials,as they will come in handy if you ever have to ship your monitor.

∙ For maximum protection, repackage your monitor as it was originally packed at the factory.

∙ To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains may be removed with a clothlightly dampened with a mild detergent solution. Never use strong solvents such as thinner, benzene, or abrasive cleaners,

these will damage the cabinet. As a safety precaution, unplug the monitor before cleaning it.

Figur3	External
	2
1	3

Cont
	1
	2
	3
	4
	5
7	6

5