AOC CT700G user manual Audio Output, 1024, brightness, Adjust the horizontal, Adjust the pictures

ADJUSTING THE PICT

CONNECTING CABLE

1.	Power Cord	4.	PC	Audio Output
2.	Signal Cable	5.	DC	Output

3.VGA Card Adapter

EXTERNAL CONTROL

1.Shuttle Knob

2.Power Indicator

3.Power button

HOW TO ADJUST A SETTING

1.Press the Shuttle Knob Key to make the OSD window appear. See figure 4.

2.Rotate the Shuttle Knob to select the desired function. See figure 4.

3.Press the Shuttle Knob again to select the function that you want to adjust.

4.Rotate the Shuttle Knob to change the settings of the current function.

5.When the OSD window is active, it shows the input signal

timing.	The "H" stands for the horizontal frequency and "V"
for the	vertical frequency.

6.To exit and save, select the exit function, or leave the monitor alone for 10 seconds. If you want to adjust any other function, repeat steps 2-4.

FRONT PANEL CONTRO PANEL CONTRO
∙	Power button :
	When pressed, the monitor enters the off mode, and
	the LED flashes. Press again and hold to restore
∙	normal status.
	Shuttle Knob :
	The Shuttle Knob is used to control the monitor
	functions. Rotate to switch functions or adjust settings.
∙	Press to select or execute a function .					1024 X 768
	Power Indicator :
	Green	￿	Power On mode.
	Blinking Green ￿			Off mode.	Figure 4		The OSD Message

1.

2.

3.

4.

CONTRAST	Adjust the picture	contrast.
BRIGHTNESS	Adjust the picture	brightness.
H- CENTER	Adjust the horizontal	position
	of the picture.
H- SIZE	Adjust the picture￿s	horizontal
	size.

6