Setting the Optimal Resolution
The recommended resolution for this monitor is 1366 by 768. To setup the monitor to this resolution, follow the s
1.ClickSTART .
2.ClickSETTINGS .
3.ClickCONTROL PANEL .
4.Double clickDISPLAY .
5.ClickSETTINGS .
6.Set the
External Controls
Press the power button to turn the monitor on or off. The other control knobs are located at front panel of the changing these settings, the picture can be adjusted to your personal preferences.
*The power cord should be connected.
*Press the power button to turn on the monitor. The power indicator will light up.
1 Eco mode(DCR) / Up
2 Source(Auto) / Exit
3 Contrast / Left
4 4:3 or wide / Right
5 Menu / Power
OSD Settings
∙Press the Menu (Power) button to activate the OSD window. Press left, right, up, down button to navigate t functions. Once the desired function is highlighted, press the Menu (Power) button to activate
∙In
∙If you want to adjust any other function, repeat steps
∙To exit OSD windows, select exit icon on main OSD, then press the Menu (Power) button .
∙OSD Lock Function: To lock the OSD, press and hold the Left button while the monitor is off and then press turn the monitor on. To
∙Eco Mode and DCR hot key : Press the Eco key continuously to select the Eco mode of brightness and DCR on no OSD ( Eco mode hot key may not be available in all models).
∙Contrast adjustment hot key : When there is no OSD , press) Ctontrastactive(Contrast adjustment bar,or pressto adjust Contrast.
∙4:3 or wide image ratio hot key: When there is no OSD,continuoupressly to change 4:3 or wide image ratio. (If the screen size is 4:3 or input signal resolution is wide format, the hot key is disalbe to adjust.)
