AOC F19 user manual Attaching Wall Mounting Arm

Cable Connections On Back of Monitor and Computer

1.Power

2.DVI

3.Analog

Turn off your computer before performing the procedure below.

1.Connect the power cable to the AC port on the back of the monitor.

2.Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the comp port.

3.(Optional ￿ Requires a video card with DVI port) - Connect one end of the 24-pin DVI cable to the back of t connect the other end to the computer￿s DVI port.

4.Turn on your monitor and computer.

If your monitor displays an image, installation is complete. If it does notTroubleshootidisplay an.ngimage, see

Attaching Wall Mounting Arm

Preparing to Install An Optional Wall Mounting Arm