Audio alarm. Change the alarm setting to on or off. The unit will emit an audible beep if there is a fault or if the unit changes to operate on battery, has a low battery condition, or is overloaded.
AUDIO ALARM: OFF
PRESS TO CHNG
Sensitivity. Select Low, Medium, or High to determine how often the until will switch to battery power. If the sensitivity it set to Low, the unit will tolerate more fluctuations in power, and will switch to battery less often. If the sensitivity is set to High, the unit will switch to battery power more often.
SENSITIVITY: MED
PRESS TO CHNG
Display dimmer. Change the brightness of the LCD display. Select Off for the display to completely darken when not in use. Push any button on the unit to illuminate the display.
DISPLAY DIM: ON
PRESS TO CHNG
Voltage transfer point. Set the value of the input utility voltage at which the unit will switch to battery power.
TO BAT IF < 88V
PRESS TO CHNG
Green function. Enable or disable the
GREEN FUNC: ON A
PRESS TO CHNG
GREEN FUNC: ON B
PRESS TO CHNG
GREEN FUNC: ON S
PRESS TO CHNG
A/V J Type Power Conditioner and Battery Backup | 7 |