Introduction

The APC Uninterruptible Power Supply (UPS) is designed to prevent blackouts, brownouts, sags, and surges from reaching your equipment. The uninterruptible power supply (UPS) filters small util- ity line fluctuations and isolates your equipment from large disturbances by internally disconnecting from the utility line. The UPS provides continuous power from its internal battery until the utility line returns to safe levels or the battery is fully discharged.

1: INSTALLATION

The User Manual and Safety Guide are accessible on the supplied User Manuals CD and on the APC web site, www.apc.com.

Unpack

Attention: Read the safety instruction sheet before installation.

Inspect the UPS upon receipt. Notify the carrier and dealer if there is damage. The packaging is recyclable; save it for reuse or dispose of it properly. Check the package contents:

Attention: The UPS comes with battery disconnected.

UPS

UPS literature kit containing:

Product documentation, safety and warranty information

Smart-UPS®User Manuals CD

120V and 230V models: PowerChute® CD

120V and 230V models: Serial and USB communication cables

230V model: Two jumper cables

Position the UPS

1 in (2.5 cm)

0-40°C

0-95%

 

Connect the Battery

The battery connector is located on the rear panel.

For battery connection, push the tethered jumper plug into the corresponding port.

1

Page 3
Image 3
APC 990-1587 user manual Introduction, Unpack, Position the UPS, Connect the Battery, Installation