Clean the condensate tank regularly
1.Turn off the unit and unplug it from its electrical outlet
2.Using the handle, slowly remove the condensate tank from the side of the unit.
3.Pour out any condensation accumulated in the tank.
4.Clean the inside of the tank with a solution of warm water and mild detergent to avoid the growth of mold and mil- dew.
5.Replace the tank in the unit.
6.Turn the power on and make sure tank is properly seated (unit will beep and Tank Full indicator will flash if tank is not properly positioned).
7.Allow the fan to run for an additional three minutes after emptying the tank to dry out the moisture in the evaporator coil.
Continued on next page
15
