Install the Rack PDU
Mounting options
You can install the Rack PDU in one of two ways: using toolless mounting pegs (provided) or mounting brackets (provided). The
Vertical mounting.
•To install the Rack PDU using the toolless mounting method, install it in the rear of the NetShelter® VX or SX Enclosure, in the cable channel directly behind the rear vertical mounting rails.
•To install the Rack PDU using the mounting brackets, install it on a vertical mounting rail on your rack or enclosure.
Horizontal mounting.
To install the Rack PDU using the horizontal mounting brackets, install the brackets on the Rack PDU and then attach the PDU to the rack using caged nuts (provided with your enclosure).
Toolless mounting
1.Slide both mounting pegs into the holes located in the channel in the rear panel of the enclosure.
2.Snap the Rack PDU into place by pushing it downward until it locks into position.
pdu0119b
You can mount two PDUs on one side of the enclosure by using the toolless mounting method.
Note
Basic Rack Power Distribution Unit | 3 |
