Local access to the control console | APC AP7820, pdu0123b instruction

Local access to the control console

You can use a local computer to connect to the PDU to access the control console.

1.Select a serial port at the local computer, and disable any service which uses that port.

2.Use the serial cable (940-0144) to connect the selected port to the serial port on the front panel of the PDU.

3.Run a terminal program (such as HyperTerminal®) and configure the selected port for 9600 bps, 8 data bits, no parity, 1 stop bit, no flow control, and save the changes.

4.Press ENTER to display the User Name prompt.

5.Use apc for the user name and password.

6.See “Control console” on page 14 to finish the configuration.

12	Metered Rack Power Distribution Unit

Image 16

APC AP7820, pdu0123b manual Local access to the control console

Contents

Installation Instrukcja Obsługi w jezyku polskim jest dostepna na CD Contents Page Features Preliminary InformationDisplay interface Receiving inspection Attach the cord retention trays Install the PDUAttach cords to the tray Mounting options Toolless mounting Bracket mounting Pdu0352a Pdu0369a Display Interface Operation Amps TCP/IP configuration methods Quick ConfigurationOverview APC Device IP Configuration Wizard Bootp & Dhcp configuration See also Option 43 = 01 04 31 41 50 Local access to the control console Remote access to the control console Use apc for both user name and password Control console Choose Network from the Control Console menu Access a Configured PDU Web interface Telnet and SSH Snmp FTP and SCP Managing the security of your system How to Recover From a Lost Password How to Update Firmware Warranty and Service Limited warrantyWarranty limitations Obtaining service Metered Rack Power Distribution Unit General policy Life-Support PolicyExamples of life-support devices Page APC Worldwide Customer Support 990-1903B-00105/2006