4.2Loadtransferswitch
The load transfer switch is actually an
4.3BatteryCharger
The UPS's battery charger converts the alternating current (AC) supplied by the utility to a direct current (DC) which is compatible with the battery. The charger maintains the battery at a constant voltage to ensure that the battery will have the capacity to support your load as often as possible. This charging method, known as “float” charging, provides maximum battery service life and minimal internal heating. The battery is charged whenever the UPS is plugged in, whether or not it is switched on.
4.4Battery
The UPS’s battery is an energy source much like the battery in an automobile. Also, like most automobile batteries, the UPS’s battery is a modern maintenance free
4.5Inverter
The UPS must convert the battery’s energy into a form that your computer equipment can rely upon during a utility failure. This is the job of the UPS’s inverter. The UPS converts the battery’s DC to AC using solid state devices (transistors), controlled using a technique known technically as “pulse width modulation”. This technique is highly efficient which means that little battery power is wasted in the conversion process. Hence, your equipment can run for long periods from the UPS before the battery’s capacity is spent.
Page 15