APC RS 700, BR700G manual Specifications, APC Worldwide Customer Support, Service, Warranty

Specifications

General
Topology	Line-Interactive
Input
Rated input voltage	120 Vac
Phase	Single phase 2+ ground
Frequency	50/60 Hz (autosensing)
Input voltage range	Default setting: 88 V-141 V
	Lower Limit Voltage Range: 78 V- 144 V
(on AVR operation)	Upper Limit Voltage Range: 88 V- 137 V
Power cable length	6 ft
Input plug type	NEMA5-15
Output
Output plug type	NEMA5-15R
Output outlet	Back-up outlets (3)
	Surge outlets (3)
Maximum load	700 VA/420 W
Output voltage	115 Vac + 8%
Frequency	50/60 Hz +1
On-battery waveform	Stepped sine wave
Transfer time	Maximum 8 ms
Surge Protection/Noise
Surge protection	Yes
Noise filter	Yes
Data line protection	ADSL, ISDN, 10/100Base-T
Interface
Interface	USB v1.1
APC Worldwide Customer Support
Technical Support	http://www.apc.com/support
Internet	http://www.apc.com
Worldwide	+1.401.789.5735

Service

If the Back-UPS arrived damaged, notify the carrier.

If the Back-UPS requires service, do not return it to the dealer.

1.Consult the Troubleshooting section to eliminate common problems.

2.If the problem persists, go to http://www.apc.com/support/.

3.If the problem still persists, contact APC Technical Support. Have the Back-UPS model number, serial number and date of purchase available. Be prepared to troubleshoot the problem with an APC Technical Support representative. If this is not successful, APC will issue a Return Merchandise Authoriza- tion (RMA) number and a shipping address.

Warranty

The standard warranty is three (3) years from the date of pur- chase. APC’s standard procedure is to replace the original unit with a factory reconditioned unit. Customers who must have the original unit back due to the assignment of asset tags and set de- preciation schedules must declare such a need at first contact with an APC Technical Support representative. APC will ship the replacement unit once the defective unit has been received by the repair department, or cross-ship upon the receipt of a val- id credit card number. The customer pays for shipping the unit to APC. APC pays ground freight transportation costs to ship the replacement unit to the customer.

Customer support and warranty information is available at the APC Web site, www.apc.com.

© 2009 American Power Conversion. All rights reserved. All APC trademarks are property of American Power

Conversion. Other trademarks are property of their respective owners.990-358306/2009