APC C5, C5BLK - page 17

- 9 -

Surge Protected COAX/RF Connectors

The C5 provides surge protection for your CATV system,

Cable Modem, DSS, or Antenna system. The surge protection

feature prevents surges traveling over Coaxial data lines from

damaging the system.

Connect the coaxial cable from the CATV or Cable Modem

provider to the connector marked “IN.”

Connect other cable from the connector marked “OUT” to the

device being protected (CATV box or Cable Modem).

Circuit Breaker

The C5 also provides a “press-to-reset” circuit breaker. When

this breaker is “tripped” due to an electrical surge or overload,

the device pops out and shuts down output power to the out-

lets. To reset the circuit breaker, push it straight inward.

CAUTION:

When resetting the Circuit Breaker, push the

button in quickly, and release the button. Do not hold the but-

ton inward. Failure to comply may result in equipment dam-

age.

Surge Protected Telephone Jacks

The C5 provides a telephone line splitter with surge protec-

tion to protect components connected via telephone line.

Connect the supplied RJ11 Telephone cable from the wall

jack (source) to the telephone line connector marked “IN”.

Connect other telephone cables to the connector marked

“OUT” and then to the equipment to be protected (Telephone,

DVR, DSS, or DSL).

Additional Surge Protected COAX/RF Connectors

The C5 also provides a surge protection for your DSS system

or RF Antenna system. The surge protection feature prevents

surges traveling over Coaxial cable from damaging the equip-

ment.

Connect the coaxial cable from the DSS or Antenna system to

the connector marked “IN.”

Connect another coaxial cable from the connector marked

“OUT” to the device being protected (DSS or Antenna).