APC SMX750 VA, SMX48RMBP2U Configuration, UPS Settings, Start up settings, General Settings

Configuration

UPS Settings

Start up settings

Configure these settings at initial start up, using the display interface or PowerChute™ software.

Note: During start up, use the display interface to configure these settings. If nothing is selected, the unit will use the default settings.

Function	Factory Default Options		Description
		• English
		• French*	The language for the display interface.
Language	English	• German*
		• Spanish*

• Italian*	*Language options will vary by model.
• Portuguese*

Local Power Good

Quality

•Good

•Fair

•Poor

Select the quality of input utility power.

•If Good is selected, the unit will go on battery power more often to provide the cleanest power supply to the connected equipment.

•If Poor is selected, the UPS will tolerate more fluctuations in power and will go on battery power less often.

If unsure of the local power quality, select Good.

Menu Type Standard	Standard or	The Standard menus display a limited set of menus and options.
	Advanced	The Advanced menus include all parameters.

General Settings

Configure these settings at any time, using the display interface or PowerChute software.

Function Factory Default Options Description

High	120 V: 140 Vac	120 V: 140-150 Vac
transfer
point	230 V: 280 Vac	230 V: 280-300 Vac

To avoid unnecessary battery usage, set the transfer point higher if the utility voltage is chronically high and the connected equipment is known to work under this condition. The POWER QUALITY setting will automatically change this setting.

Note: Use the Advanced Menus to configure this setting.

Low	120	V: 85 Vac	120	V: 75-85 Vac
Transfer	230	V: 170 Vac	230	V: 150-170 Vac
Point

Set the transfer point lower if the utility voltage is chronically low and the connected equipment can tolerate this condition.This setting may also be adjusted using the power quality setting.

Note: Use the Advanced Menus to configure this setting.

Nominal	230 V: 230 Vac	230 V: 220, 230, 240 Vac Set the nominal output voltage of the UPS on battery. This
Output
	120 V: 120 Vac	120 Vac: N/A	is available on 230 V models only.
Voltage

Smart-UPS X 750/1000/1500 VA 120/230 Vac Rack-Mount 2U 7