Battery Pack and UPS Connection Procedure
b. Install the UPS and battery pack battery covers and bezels .
6. Go to “Terminal Mode Configuration” on page 9 to configure the UPS to recognize the battery pack(s).
Battery Pack and UPS Connection Procedure
The battery pack is equipped with the following connectors. Refer to the UPS user manual for UPS connector types and definitions.
Connectors | Type | Description |
|
|
|
| TVSS screw | The UPS and battery pack features a Transient Voltage |
|
| sion (TVSS) screw located on the rear panel, for connecting the ground |
|
| cable on surge suppression devices such as telephone and network line |
|
| protectors. |
|
| NOTE: Prior to connecting the grounding cable, turn off the UPS and |
|
| disconnect it from the utility power outlet. |
|
|
|
| battery pack | |
| connector | outages. A maximum of 10 battery packs can be used with the UPS. |
|
| NOTE: See the APC Web site, www.apc.com for information on the |
|
| battery pack, SURTA48XLBP or SURTA48XLBPJ. |
|
|
|
Prior to connecting the grounding cable, ensure that the UPS is NOT connected to utility or battery power circuits. See the UPS user manual for additional
Caution instructions.
7 |
