Playing Back a Disc
HOW TO PLAYBACK A DISC.
Basic Playback (see page 10
How to playback DVD video discs or VIDEO CDs
• Turn on the TV and choose the video input source which is connected to the DVD video player.
How to enjoy the sound from the audio system
•Turn on the audio system and choose the input source which is connected to the DVD video player.
•Set the playback picture size respectedly to the ratio of the connected TV via the SETUP MENU displays.
•Set the "AUDIO OUTPUT" to "ANALOG" via the SETUP MENU displays, if you do not have the necessary equipment to enjoy Dolby Digital (DTS) sound.
1. Press the POWER button displayed on the front panel.
The POWER indicator will illuminate red, as the DVD video player turns on.
POWER
2. Press the OPEN/CLOSE button.
This will open the disc tray.
3. Place the disc on the disc tray.
Be sure the playback side is faced down.
4. Press ENTER/PLAY
After closing the disc tray playback will start.
As the DVD video player is reading the disc, a menu will appear on screen.
Notice
•A disc may be damaged if it is not correctly placed on the guides in the disc tray, this may also cause the DVD video player to malfunction.
•Do not force or place anything other than DVD video disc, VIDEO CD, audio CDs, or MP3 CD on the disc tray.
Notice
•The menu screen will appear automatically or you may access the menu screen by pressing the TITLE button.
NOTICE
•Moving the DVD video player during playback may cause damage to the disc as well as the player.
•To open and close the disc tray, you may only use the OPEN/CLOSE button on the remote control or DVD video player.
•Do not force or place anything other than DVD video disc, VIDEO CD, audio CD on the disc tray.
A P E X | D I G I T A L | 19 |
