Citizen CT-S300 manual See Also, Example When xL = 64, xH = 0, yL = 96, yH =

• The maximum definition area of this printer is 2M bits (256K bytes). Multiple NV bit images can be defined, but bit images of which total size (Bit image data + Header) exceeds 2M bits (256K bytes) can not be defined.

• The printer state will change to BUSY just before the writing operation into the non-volatile memory begins. Also,for a printer that have a dip switch [BUSY], the printer state will change to BUSY just before the writing operation begins regardless of the state of the dip switch.

• While this command is being executed, it is not possible to send ASB status or to detect the printer status even when the ASB function is selected.

• If this command is sent while a macro is still being defined, the definition process will be stopped and the execution of this command will start.

• NV bit images that are defined already are not initialized by using ESC @ command, or by resetting the printer or turning the power off.

• The command only executes definition of NV bit image, but not start printing. The printing of NV bit image will be executed by FS p.

• Because frequent writing in the non-volatile memory can destroy the memory, the writing command should be used less than 10 times a day.

• Just after the completion of the writing operation into the non-volatile memory, the printer hardware will be reset. Therefore, download characters, download bit images, and macro definition will be made undefined. The receiving buffer/printer buffer will be cleared, and each setting will go back to its default value. Then the

	status of dip switches will be checked once more.
	• It may happen that the printer becomes BUSY during the process of writing data
	into the non-volatile memory in the execution of this command. When the printer
	becomes BUSY, it will stop receiving data. Therefore, sending data from the host
	(including real time command) is prohibited.
[See Also]	FS p
	(xL + xH ⋅ 256) ⋅ 8 dots = 512 dots

(yL + yH ⋅ 256) ⋅ 8 dots = 768 dots

[Example] When xL = 64, xH = 0, yL = 96, yH = 0

— 79 —