Setting memory switch 2 a = | Citizen CT-S300 specs

•Setting memory switch 2 (a = 2)

	n	b (Set Value)	Function
	1	49 (Default)	Reserved
	2	48	Disables auto cutter.
	2	49 (Default)	Enables auto cutter.
		49 (Default)	Enables auto cutter.
	3	48 (Default)	Enables stored printing.
	3	49	Disables stored printing.
		49	Disables stored printing.
	4	48	Sets printing at full columns to be the same as CBM1000.
	4	49 (Default)	Sets printing at full columns to be the same as EPSON.
		49 (Default)	Sets printing at full columns to be the same as EPSON.
	5	48 (Default)	After cover close and PE recovery, prints as it is.
	5	49	After cover close and PE recovery, prints from the
		49	After cover close and PE recovery, prints from the
			beginning using PAGE MODE, barcode, image,
			double-height printing, etc. as a unit.
	6	48 (Default)	Sets paper width to 80 mm.
	6	49	Sets paper width to 58 mm.
		49	Sets paper width to 58 mm.
	7	48 (Default)	Reserved
	8	48 (Default)	Enables NPE.
	8	49	Disables NPE.
		49	Disables NPE.

•Setting memory switch 3 (a = 3)

	n	b (Set Value)	Function
	1	48 (Default)	After clearing cutter error, can be restored by Feed SW.
	1	49	After clearing cutter error, cannot be restored by Feed SW.
		49	After clearing cutter error, cannot be restored by Feed SW.
		48 (Default)	When selecting cover open error as recoverable error,
	2		recovered by cover close.
	2	49	When selecting cover open error as recoverable error,
		49	When selecting cover open error as recoverable error,
			recovered by command.
	3	48 (Default)	Resets with parallel pin 31.
	3	49	Does not reset with parallel pin 31.
		49	Does not reset with parallel pin 31.
	4	48 (Default)	Uses thermal paper.
	4	49	Uses Black mark paper.
		49	Uses Black mark paper.
	5	48 (Default)	Used with 48/32 print columns.

		49	Used with 42/30 print columns.
		49	Used with 42/30 print columns.
	6	48 (Default)	Undefined
	7	48 (Default)	Sets CBM1000-noncompatible mode.

		49	Sets CBM11000-compatible mode.
		49	Sets CBM11000-compatible mode.
		48 (Default)	Sets cover open error during printing to be auto recovery
	8		error.
	8	49	Sets cover open error during printing to be recoverable
		49	Sets cover open error during printing to be recoverable
			error.

— 93 —

Image 98

Citizen CT-S300 manual Setting memory switch 2 a =

Contents

Command Reference Revision Table of Contents Macro Commands Character Code Table Example Program coding Print Character Commands Function Mode Print Control Commands Function ModeCommand Bit Image Commands Function Mode Print Position Commands Function ModeLine Feed Span Commands Function Mode Status Commands Function Mode Cutter Commands Function Mode Panel Switch Commands Function ModeMacro Commands Function Mode Bar Code Commands Function Mode Printer Function Setting Commands Mode Other Commands Function Mode Range DefaultCode Outline Command Details Sample Program See Also Sample Program ESC FF, ESC L, ESC S ESC J n FF, ESC L, ESC S Default Sample Program Print Results ESC d n Can ESC L, ESC W Default See Also ESC SP n ESC ! n Bit Function Value Lprint CHR$&HA ESC % n ESC ESC & s n m a p s ⋅ a m-n+1 MSB LSB ESC n ESC ? n ESC E n ESC G n Range Outline ESC M nESC R n Character Set Default Sample Program ESC V n ESC t n Character Code Table Condition ESC ~ J n Valid in CBM1000II-Compatible Mode Black-based Paper Red-based Paper DC3 n Valid in CBM1000II-Compatible Mode Horizontal Magnification Hex Decimal GS ! nBit Function Value Hex. Number Decimal Number Vertical Magnification Hex Decimal GS B n 1DH62Hn Print Position Commands Printing Result ESC $ n1 n2 ESC D n k Null Printing Direction Start Point ESC W xL xH yL yH dxL dxH dyL dyH CAN, ESC L, ESC T, GS P ESC \ nL nH ESC a n Position GS $ nL nH GS L nL nH GS P, GS W GS W nL nH GS L, GS P GS \ nL nH ESC ESC 3 n ESC 2, GS P ESC * m n1 n2 d k IMG1 GS * n1 n2 d n1 ⋅ n2 ⋅ Gosub IMG GS / m See Also ESC &, GS GS v 0 m xL xH yL yH d1...dk Msblsb DLE EOT n Status Bit Status Hex Decimal Status caused by an error when n = 3 is specified GS a n Bit Status Item Addressed by ASB Hex Decimal 1st byte Printer information 4th byte Paper Sensor information GS r n Drawer kick-out connector status n = 2 ESC c 3 n Bit Position Value ESC c 4 n ESC c 5 n Macro Commands GS n1 n2 n3 GS V m GS V m n GS H n Printing Position Print Results GS f n Font 1DH68Hn Bar Code System Range of n Range of d GS k m d1 ...... dk Null GS k m n d1 ...... dnBar Code System Range of k Range of d For For Standard ModeFor page Mode Description of Bar Codes UPC-E Control Character HRI Character DEL Special characters Hex Code Set a Code Set B Code Set C UPC-A Type Print Sample Outline of SymbolBar Code Print Example JAN-8 GS w n P n m See Also ESC *, FS q, GS /, GS v Q n xL xH yL yH d1…dk 1… xL xH yL yH d1…dk n Example When xL = 64, xH = 0, yL = 96, yH = GS FF Valid Only at B.M Paper Selection GS Valid Only at B.M Paper Selection FF, GS GS a m n Valid Only at B.M Paper SelectionCorrecting Direction GS C0 m n GS C1 n1 n2 n3 n4 n5 n6 GS C2 n1 n2 GS C n1 n2 n3 n4 n5 GS c Sample Program Print Results GS I n1L n1H n2L n2H Default Kind of Real-time Command GS D pL pH m a1 b1 ··· ak bk GS E pL pH fn ··· Function No. fn Hex No. of Data Null 1dH28H45pL pH fn d1 d2 d3 Set Value Function Setting memory switch 2 a = Setting memory switch 4 a = 1dH28H45pL pH fn a NL + nH ⋅ Paper Width NL + nH ⋅ Printing Density NL + nH ⋅ Paper NL + nH ⋅ Printing SpeedNL + nH ⋅ No. of Divisions for Conducting Head NL + nH ⋅ ACK Output Position 1FH Sending Data 1st Byte 2nd Byte 3rd Byte Divisions 1st Byte 2nd Byte 3rd Byte 4th Byte 5th Byte Setting Status Sending Data StoredControl Amount = 209 PNE sensor judgment time Font Type Dy ⋅ xk Fn = 1dH28H45pL pH fn x c1 c2 y d1...dyXxk 1dH28H45pL pH fn c1 c2 Baud Rate Parity SettingSetting Data Length Flow Control Set value PL + pH ⋅ 256 = Fn = = 3, 5, 11 GS K pL pH fn m 1dH28H4BpL pH fn m Fn = 4, 48 m No. of Divisions for Head Conducting ESC !, ESC -, ESC E, ESC G, ESC Commands for this function Command TypeGS M pL pH fn m ESC SP, ESC 2, ESC Fn = 1, 49 Function GS M pL pH fn m fn = 1 Fn = 2, 50 Function GS M pL pH fn m Fn = 3, 51 Function GS M pL pH fn m fn = 3 Fn = 48 Function GS N pL pH fn m fn = Default OutlineGS N pL pH fn m DLE ENQ n DLE DC4 fn m t Specification of fn = DLE DC4 fn d1...d7 Specification of fn = Hex Decimal No. of Data ESC = n Bit Equipment Value ESC @ FF, CAN, ESC FF, ESC S, ESC T, ESC W, GS W, GS \ G3S WFS P ESC S ESC p m n1 n2 Category of Paper Standard ModeGS a pL pH n m Category of Test Printing Kind of Printer Information Type of Printer ID Specification Value HexGS I n CBM 127 GS P x y ESC RS Character Code Table Codepage 00H to 7FH & Katakana Codepage 00H to 7FH & PC850 Multilingual Codepage 00H to 7FH & PC860 Portuguese Codepage 00H to 7FH & PC863 Canadian-French Codepage 00H to 7FH & PC865 Nordic Codepage 00H to 7FH & PC852 Eastern Europe Codepage 00H to 7FH & PC857 Russian Codepage 00H to 7FH & PC857 Turkish Codepage 00H to 7FH & PC864 Arabic Codepage 00H to 7FH & WPC1252 International Character Code Table Switching Between Standard Mode and page Mode Standard Mode ESC L ESC SESC FF Mode Mapping of Print Data in the Print Area Example of Using page Mode Example 2 Result of Print Print Result of Adding a Program of Example 3 to Example Bidirectional Parallel Interface Overview Negotiation Procedure Negotiation Precautions When 76543210 Supported Printer Nibble Mode Data Communication from Printer to Host Byte Mode Termination Device IDCLS Printer Xoff Identification of Send Status Command and FunctionXON