fn = 3: Function 3 Setting Memory Switch Value
GS (E pL pH fn [a1 b18 ··· b11] ··· [ak bk8 ··· bk1] fn = 3
[Code] | <1d>H<28>H<45>pL pH fn[a1 b18···b11]···[ak bk8···bk1] | |
[Range] | 10 (pL + pH ⋅ 256) | 65535 |
| fn = 3 |
|
| a = 1, 2, 3, 4 |
|
| b = 48, 49, 50 |
|
[Outline] | • Changes the memory switch set in a to the value set in “b”. | |
|
|
|
| b | Function |
48Sets corresponding bit to OFF.
49Sets corresponding bit to ON.
50Does not change corresponding bit.
•Setting memory with 1 (a = 1)
n | b (Set Value) | Function | |
1 | 48 (Default) | Reports the power on. | |
49 | Does not report power on. | ||
| |||
2 | 48 (Default) | Sets input buffer capacity to 4K bytes. | |
49 | Sets input buffer capacity to 48 bytes. (Note) | ||
| |||
3 | 48 (Default) | Sets input buffer full and offline to be Busy. | |
|
| ||
49 | Sets to be busy with input buffer full. | ||
| |||
| 48 (Default) | At the occurrence of receiving error, replaces the data | |
4 |
| with “?”. | |
49 | At the occurrence of receiving error, ignores the data. | ||
| |||
|
|
| |
5 | 48 (Default) | Disables CR (0DH). | |
49 | Enables CR (0DH). | ||
| |||
6 | 48 (Default) | Reserved | |
|
|
| |
7 | 48 (Default) | Does not reset at serial I/F pin 6. | |
49 | Resets at serial I/F pin 6. | ||
| |||
8 | 48 (Default) | Does not reset at serial I/F pin 25. | |
49 | Resets sat serial I/F pin 25. | ||
|
(Note) Differs with the number of columns (as much as font A full columns).
— 92 —
