ESC = n
[Function] | Data input control |
|
|
| ||
[Code] | <1B>H<3D>H<n> |
|
|
| ||
[Range] | 0 n | 255 |
|
|
|
|
[Outline] | • Selecting equipment for which data input from the host is valid. |
| ||||
| • Each bit of “n” indicates as follows. |
|
|
| ||
| • When the printer has not been selected, this printer abandons all the received data | |||||
| until it is selected by this command. |
|
|
| ||
|
|
|
|
|
|
|
| Bit |
| Equipment | Value |
| |
|
| 0 |
| 1 | ||
|
|
|
|
| ||
| 0 |
| Printer | Invalid |
| Valid |
| 1 |
| Not defined | — |
| — |
| 2 |
| Not defined | — |
| — |
| 3 |
| Not defined | — |
| — |
| 4 |
| Not defined | — |
| — |
| 5 |
| Not defined | — |
| — |
| 6 |
| Not defined | — |
| — |
| 7 |
| Not defined | — |
| — |
[Caution] | • Even when the printer has not been selected, it can become BUSY state through | |||||
| printer operation. |
|
|
| ||
•When the printer is deselected, this printer discards all the data until it is selected with this command. (Except DLE EOT, DLE ENQ, and DLE DC4)
[See Also] | n = 1 |
— 120 —
