ESC ! n

[Function]

Collectively specifying the printing mode

 

 

[Code]

<1B>H<21>H<n>

 

 

[Range]

0

n

255

 

 

 

[Outline]

Printing mode is assigned.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Bit

 

Function

Value

 

 

 

 

 

0

1

 

 

 

 

 

 

 

 

 

 

 

0

 

Character Font

Font A (12 24)

Font B (9 17)

 

 

 

 

1

 

Undefined

 

 

 

 

2

 

Undefined

 

 

 

 

3

 

Emphasis

Canceled

Specified

 

 

 

 

4

 

Double height

Canceled

Specified

 

 

 

 

5

 

Double width

Canceled

Specified

 

 

 

 

6

 

Undefined

 

 

 

 

7

 

Underline

Canceled

Specified

 

 

 

 

 

 

 

[Caution]

With double height and double width being specified simultaneously, quadruple

 

 

 

 

characters are created.

 

 

An underline is attached to the full character width, which, however, is not attached to the part having been skipped by the horizontal tab (HT). Neither is it attached to 90°-right-turned characters.

The underline width is as specified by the ESC – command. (The default setting is 1 dot width.)

Setting by this command is invalid for Kanji except setting and canceling of enhanced printing.

In case characters with different vertical magnification ratios coexist on the same line, they are printed on the same base line.

ESC E, ESC M, ESC –, and GS ! can individually set or cancel the mode but the command processed last is valid.

Setting or cancelling of enhanced 3rd bit is valid for alphanumric and kana and kanji. Other print mode is valid only for alphanumeric and kana characters.

[Default]

n = 0

[See Also]

ESC E, ESC –, GS !

— 14 —

Page 19
Image 19
Citizen CT-S300 manual ESC ! n, Bit Function Value