Citizen CT-S300 manual GS H n, Printing Position

2.2.11 Bar Code Commands

GS H n

[Function]	Selecting of printing position of HRI characters
[Code]	<1D>H<48>H<n>
[Range]	0	n	3
	48	n	51

[Outline]	Selecting printing position of HRI characters in printing bar codes.
	“n” means the followings.
	n	Printing Position
	0, 48	No printing
	1, 49	Above the bar code
	2, 50	Below the bar code
	3, 51	Both above and below the bar code
	The HRI characters refer to the bar code-turned characters so that you can read them.
[Caution]	• The HRI characters are printed in the font selected with GS f.
	• Specify before the GS k command.
[Default]	n = 0
[See Also]	GS f, GS k

[Sample Program]

LPRINT CHR$(&H1B);”3”;CHR$(5);

LPRINT CHR$(&H1D);”h”;CHR$(50);

LPRINT CHR$(&H1D);”H”;CHR$(0);

GOSUB BC

LPRINT CHR$(&H1D);”H”;CHR$(1);

GOSUB BC

LPRINT CHR$(&H1D);”H”;CHR$(2);

GOSUB BC

LPRINT CHR$(&H1D);”H”;CHR$(3);

GOSUB BC

END

BC:

LPRINT CHR$(&H1D);”k”;

LPRINT CHR$(4);

LPRINT “12”;CHR$(0);

LPRINT CHR$(&HA);

RETURN

— 66 —