(2)If a sufficient area cannot be provided as a result of step (1), the print area is extended toward the left (so, the left margin is decreased).

Printable area

A

(1) Extended

toward the right

Left margin

 

(2) The left margin

Print area width

is trimmed

 

(3)If a sufficient area cannot be provided as a result of step (2), the right spacing is trimmed.

When mapping a bit image (or downloaded bit image), if the print area is narrower than the minimum width of the bit image (two dots for single density, or one dot for double density), only the line for that image is handled as follows:

(1)The print area is extended toward the left (so, the left margin is decreased) until it is equal to the minimum width of the image, but not wider than the printable area.

[Default]

When paper width is 80 mm: nL = 64, nH = 2

 

When paper width is 58 mm: nL = 128, nH = 1

[See Also]

GS L, GS P

— 41 —

Page 46
Image 46
Citizen CT-S300 manual Gs L, Gs P