GS $ nL nH

[Function]

Specifying the absolute position of character vertical direction in PAGE MODE

[Code]

<1D>H<24>H<nL><nH>

[Range]

0

nL 255, 0 nH 255

[Outline]

Specifies the vertical position of character at the start point of data development in

 

PAGE MODE using absolute position based on the start position. The position of

 

vertical direction of character at the start position of next data development is the

 

position [(nL + nH 256) basic calculation pitch] from the start position.

[Caution]

This command is ignored except at PAGE MODE selection.

 

Absolute position setting exceeding the specified print area is ignored.

 

Position in horizontal direction of character at the start position of data development

 

 

is not shifted.

 

Start point used as the reference is set by <ESC T>.

 

The following operation occurs at the start point of <ESC T>.

 

 

(1) When start point is set at “upper left” or “lower right”, the absolute position of

 

 

paper feed direction (vertical direction of character) is set. In this case, basic

 

 

calculation pitch (y) of vertical direction is used.

 

 

(2) When start point is set at “upper right” or “lower left”, the absolute position of

 

 

vertical direction of paper feed (vertical direction of character) is set. In this

 

 

case, basic calculation pitch (x) of horizontal direction is used.

 

Basic calculation pitch is set by <GS P>.

 

When fractional number is caused by the calculation, it is corrected by the minimum

 

 

pitch of mechanism and the rest is discarded.

[See Also]

ESC $, ESC T, ESC W, ESC \, GS P, GS \

— 38 —

Page 43
Image 43
Citizen CT-S300 manual GS $ nL nH