Troubleshooting Flow Charts
Heater Fails to Operate
Analog Controls - 12/22/03
Yes
Check to be sure the powerChecklighttoisbeon.sureIf thethe powerpowerlightlightis off,isoncheck.If the
forpowera trippedlight iscircuitoff, check breakerfor .trippedResetcircuitthe
circuitbreakerbreak. Rersetif the necircuitessarybreaker. if necessary.
Yes
Yes
Problem
Problem
Solved.
Solved.
temperature)
START
Is the thermostat turned UP, and the toggle or rocker switch selecting either the
SPA or POOL thermostat ?
Is the heater
operating correctly?
Is the heater operating correctly?
Yes
No
Position controls to selectPositionPOOLcontrolsSPA;to
selectrotatePOOLselectedor SPA; thermostatrotate selectto thed maximumthermostatsettingto the.
maximum setting.
No
Check to see that the poolCheckpumptoisseeoperatingthat the andpoolthepumpflow lightis operatingis on.
Makeandthesureflowall lightwateris on. valvesMarke insuretheallcorrectwater
positionvalves areandinthethefiltercorrect andpositionpump basketandthearefilter and pumpclean.basket are clean.
No
The heater is equipped withThea fivheaterminuteis equippeddelay.
withWait atfiveleastminutefivedelay. minutesWaittoatallowleastthefive
minutestimerto toresetallow. the
timer to reset.
Is the unit operating
correctly?
No
Contact
Contact
AquaCal for
AquaCal for
Assistance at: Assistance at: 800-786-7751
29