Aquacal H/AT120R Start-Up& Operation, Heat Wave/AeroTemp, 100R &120R Control Panel Features

START-UP & OPERATION

Getting Familiar with Controls

Heat Wave/AeroTemp

100R &120R Control Panel Features

1)POWER LIGHT – Indicates electrical power is supplied to the heater.

2)FLOW LIGHT – Indicates water pressure (flow) is present at the heater.

3)DEFROST LIGHT – Indicates heater is in the defrost mode.

4)HIGH REFRIGERANT PRESSURE – Indicates excessively high refrigerant pressure. Heater may not be receiving adequate water flow.

5)LOW REFRIGERANT PRESSURE – Indicates abnormally low refrigerant pressure.

6)POOL TEMPERATURE CONTROL – Controls POOL temperature set-point.

7)SPATEMPERATURE CONTROL – Controls SPA temperature set-point.

8)POOL/OFF/SPA SELECTOR SWITCH – Selects between POOL and SPA thermostats, or OFF position.

9)HEAT/COOL SELECTOR SWITCH – Selects either HEATING or COOLING.

17