ESC S

[Function]

Selecting STANDARD MODE

[Code]

<1B>H<53>H

 

[Outline]

Switches from PAGE MODE to STANDARD MODE.

[Caution]

• This command is only effective if it is entered when in PAGE MODE.

 

• Any data mapped in PAGE MODE is erased.

 

• After this command is executed, the beginning of the line is taken as the next print

 

start position.

 

 

• The print area defined by ESC W is initialized.

 

• The commands listed below, which have separate settings for STANDARD MODE

 

and PAGE MODE, are changed to the settings for STANDARD MODE use.

 

(1)

Spacing setting: ESC SP, FS S

 

(2)

Line feed width setting: ESC 2, ESC 3

 

• The following commands are valid only in setting in STANDARD MODE.

 

(1)

ESC W

Sets the space amount for setting print area in PAGE MODE.

 

(2)

ESC T

Selects the printing direction of character in PAGE MODE.

 

(3)

GS $

Sets the absolute position of character vertical direction in PAGE

 

 

 

MODE.

STANDARD MODE is selected when the printer is turned on or reset, or when ESC @ is executed.

[See Also]

FF, ESC FF, ESC L

— 123 —

Page 128
Image 128
Citizen CT-S300 manual Esc S