Citizen CT-S300 manual GS I n1L n1H n2L n2H

GS I n1L n1H n2L n2H

[Function]	Setting the Black mark length
[Code]	<1D>H<6C>H<n1L><n1H><n2L><n2H>
[Range]	0	n1L	255 (24 n1L + n1H ⋅ 256 360)
	0	n1H	1
	8	n2L	30
	n2H = 0
[Outline]	Define the specifications (length) of the Black mark used.
	n1: Sets the Black mark length
	n2: Sets the Black mark gap length
	n1 and n2 are specified units of millimeters.
	Divide the maximum Black mark length by 256 with the quotient designated as n1L
	and the remainder as n2H. Accordingly, the Black mark length available for setting
	will be n1L + n2H ⋅ 256.
[Caution]	• If the specified length is outside of Black mark specifications, the default length is
		set.
	• 360 mm is the maximum Black mark length allowed to define and 24 mm is the
		minimum.
	• 30 mm is the maximum allowable Black mark gap length to define and 8 mm is the
		minimum.
[Default]	The following default values are set when memory switch SW4-1 is set to ON.
	n1L = 25
	n1H = 0
	n2L = 8
	n2H = 0

n1

n2

— 87 —