Accessories Included
1.Easy removal mounting bracket system.
2.Microphone bracket system.
3.All
4.
5.FCC part 95, Subpart D.
6.Owner’s Manual.
Where to Locate your CB Transceiver
Your new Midland CB is designed to be installed under the dash or vertically on a console of your vehicle. Safety and convenience are the primary considerations in deciding exactly where to locate your radio.
Caution: Be sure that the unit is located so that it does not interfere with the driver, supplemental restraint systems (air bags) or impair access to any controls. Connecting cables must be routed and secured in such a manner as not to interfere with the operation of the brake, accelerator or other controls. Interference from either the unit or connecting cables may contribute to the loss of control of the vehicle.
Mechanical Mounting
1.Heeding the caution, use the mounting bracket as a template for marking the location of screw holes under the dash. Use an awl, nail or other sharp pointed object to mark the hole locations.
2.Drill a 1/8” hole for each screw hole in the mounting bracket. Attach the bracket to the dash with the Phillips head sheet metal screws provided.
Extreme care should be exercised when drilling into the dash to avoid damage to
3.Position the main unit between the bracket arms in line with the retention knobs. Set the angle for optimum operating, comfort and accessibility.
4.Tighten the retention knobs.
English Français Español
www.midlandradio.com | 3 |
