Midland Radio CB-1 owner manual Operating Controls

Operating Controls

CB/PA	Normal /	TX	Digital	Channel
	CH9		Channel
Switch		Indicator		Select Buttons
	Switch		Indicator

Locking	RF Gain	Squelch	ON/OFF
Mic	Knob	Knob	Volume
Connector			Knob

Microphone Connector: Plug in the supplied microphone to this connector. Received signals will not be heard without the microphone.

ON/OFF Volume Knob: In the off position your transceiver power is off. Turn this control clockwise to switch on the unit an d adjust the volume.

Channel Buttons: This easy-to-operate control allows changing of CB channels, either up or down.

Squelch Control: Adjust this control until background noise just disappears. If the control is adjusted too far clockwise it may cause muting of weaker signals.

Channel Indicator: The LED displays the channel number.

TX LED: Indicator shows the unit is transmitting.

PA/CB Switch: When in PA mode, it causes your voice to operate the optional external PA speaker. In CB mode, the microphone operates the transmitter.

Channel 9/Normal Switch: Allows you listen to emergency channel 9.

6 www.midlandradio.com