Standard - AT1302, AT2002, AT2402, AT2702
FUNCTIONS & FEATURES
Power On/Off
1. Power On
Plug in the supply cord, and press the MAIN POWER SWITCH on the front of the TV to turn the power on. A channel number will appear on the upper right corner of screen. Also, the red indicator light on the TV will come on.
2. Standby (Soft Off)
With the main power ON, press the Standby button on the remote control. This will put the TV in “Standby” or soft off mode. The red indicator light on TV set will NOT turn off. To turn the TV on again, simply press the Standby button on the remote control, or press one of the CH +/ - buttons on the TV set.
3. Power Off
With the power ON or in Standby mode, press the MAIN POWER SWITCH on the front of the TV set to completely turn off the power to the TV set. The red indicator light on the front of the TV set will turn off.
4. Auto Off
If the TV is ON (not Standby mode), and there is no signal is coming into the TV set for 15 minutes, the TV will turn off.
Note:
Avoid switching the TV on and off frequently or rapidly. Doing so may shorten the life span of internal components.
STANDBY 
On Screen Display
Tuner Mode
Pressing the DISPLAY button on the remote control while in Tuner mode will cause the channel number, antenna mode, and clock to appear in the upper right of the screen. To remove, press DISPLAY again.
Video Mode
Pressing the DISPLAY button on the remote control while in Video Mode will cause the word “Video” and the clock to be displayed. Press DISPLAY again to remove.The word “Video” will continue to be displayed if no video signal is present.
FUNCTION
CH + / -
VOL + / -
Basic Functions
Changing the Channel
While in Tuner mode, press the CH +/ - key to change the channel, or use the numeric keypad to enter a new channel. For channels over 99, press the 100+ button and then the last two digits of the channel.
Adjusting the Volume
To adjust the volume, press the VOL +/ - key. Also, you may press the FUNCTION ASSIST key along with the VOL +/ - key to adjust the volume in increments of 4.
Muting the Volume
To mute the volume, press the MUTE key. To restore the volume, press MUTE again or press the VOL + key.
DISPLAY
MUTE
14
