Apple 073-0541 , Installing the Replacement Drive

Power Mac G4 Cube ATA Hard Drive -

5 Push in the core latch, and reposition the computer chassis so you can

access the heatsink and hard drive.

6 Loosen, but do not remove, the three captive screws at the heatsink.

7 Lift up the loosened heatsink, and slide the hard drive out of the carrier.

Installing the Replacement Drive

1 Position the replacement drive on the drive carrier so that the ribbon

cable and power cable connectors align with the slots at the end of the

carrier.

2 Lift up the heatsink, and slide in the drive.

3 Align the heatsink ﬁns to the opposite heatsink ﬁns. Tighten the three

captive screws.

Screws

Hard Drive

Heatsink